MEASURING GUIDE FOR WARDROBE INSERTS
Measuring Guide for Wardrobe Inserts
COMPLETE TIME – 5 MIN
Measuring up for wardrobe inserts is simple.
Don’t worry if your opening is not completely level or parallel, our system can be adjusted to compensate for these conditions.
To ensure the made to measure wardrobe inserts fit perfectly in your space, please follow these simple steps to measuring:
1. Check the Height
Our pre-build system is available in 2 gable height options:
– 1850mm
– 1500mm
Please be aware, the system is designed to be hanging 250mm above the floor level, so the top shelf ideally should be installed at 2050mm or 1750mm above the floor, respectively
2. Measuring Width
Once the position of the top shelf is determined, measure the width
3. Design and order online
Use the measurements and design your perfect wardrobe inserts using our online ordering tool, where you can add different shelving and hanging rail units and the system will calculate the cost automatically.
Things to consider:
- The depth of all our wardrobe inserts is 420mm. Make sure you have enough space inside your wardrobe to accommodate the system. Allow enough space for the wardrobe sliding doors tracks, and make sure they don’t come into contact with shelvings.
- The whole system will be suspended and hanging on the rail, which is behind the top shelf. Remove anything that can interfere from the back wardrobe wall.
Once we get your design we might slightly adjust the sizes you’ve chosen to make sure your wardrobe inserts fit correctly. - All products made of high quality white melamine board with white laminated edges
If you need any help call one of our friendly staff for assistance. - All products made of high quality white melamine board with white laminated edges
- If you need any help call one of our friendly staff for assistance.